簡單介紹
DA400S磁粉探傷儀采用了許多進技術來形成感應磁場，具有通用性，固定的AC或DC磁場，用于表面和近表面缺陷的檢測，是控制器與固態電子器件為一體的高性能的輕便儀

產品型號：DA400S

更新時間：2025-10-22

廠商性質：代理商

訪問量：2367

服務熱線

400-892-6117 021-31268583 021-57631797

立即咨詢

產品分類

PRODUCT CLASSIFICATION

探傷儀

查看全部產品

數字扭力測試儀的應用場景介紹

手電筒紫外線燈的原理及應用

數字扭力測試儀：提高精確度和效率的關鍵工具

葉輪風速儀的選型要掌握這些內容

產品介紹

DA400S磁粉探傷儀的詳細介紹

DA400S磁粉探傷儀

美國派克便攜式：
美國PARKER公司磁粉探傷儀DA-400采用了許多*進技術來形成感應磁場，具有*通用性，固定的AC或DC磁場，用于表面和近表面缺陷的檢測，是控制器與固態電子器件為一體的高性能的輕便儀。可疳高能磁場集中施加到檢測區，快速準確發現材料缺陷。磁極可將AC或DC磁場施加到各種形狀工件的檢測區域，沒有電弧燒傷。

的技術參數：

型號	DA400	DA400S
電源	110VAC 50-60Hz	230VAC 50-60Hz
電流	4A	3A
磁場	交流	交直流
工作周期	2分鐘開/關	2分鐘開/關
重量	3.68Kg	3.68Kg
尺寸	18823554mm	18823554mm
磁極間距	0-305mm	0-305mm
電纜	3芯2m長電纜	3芯2m長電纜

DA-400 Series Contour Probes^®

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape... in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications. Certified for European CE requirements.

Versatility and powerful performance in a lightweight （8 lbs.） instrument
Constant AC or pulsed DC fields with the flip of a switch for the location of surface and some sub-surface defects
Apply continuous or residual magnetic fields and demagnetize too
Use with dry powder, wet fluorescent or visible
High impact molded housing
One year repair/replacement guarantee

DA-400s Series Contour Probes^®SPECIFICATIONS

Electronics	Reliable solid state circuitry contained within molded housing
Mechanical capacity	Minimum-Maximum distance across poles: 0 to 12"（0-305mm）
Fields – selective	AC: constant level DC: pulsed DC Flux density approximay 68,000 lines per square inch at 4" pole spacing. （50 pound pull.）
Power source	105-230 VAC, 50-60 Hz, 4 Amps 3-connector power cord and plug. （Available in export voltages.）
Controls	1 Momentary, push to test 2 AC/DC selector switch
weight	3.4kg
Finish	Injection Molded Housing Glass Filled Nylon®